<var id="rld5p"><strike id="rld5p"></strike></var>
<listing id="rld5p"></listing>
<cite id="rld5p"></cite><cite id="rld5p"><video id="rld5p"><listing id="rld5p"></listing></video></cite>
<var id="rld5p"><video id="rld5p"></video></var>
<cite id="rld5p"><strike id="rld5p"></strike></cite>
<menuitem id="rld5p"></menuitem>
<var id="rld5p"></var>
<var id="rld5p"><video id="rld5p"></video></var>
About us Honor Products Order Network Contacts Home

 HH-2 Primary Deck Covering

 HQ-1 Lightweight Primary ...
 HQ-2 Super Lightweight ...
 HH-3 (A-60 Class) Fireproof...
 HH-4 (A-60 Class) Fireproof...
 HH-5 (A-60 Class) SuperLight...
 HHF-1 (A-60 Class) Floating...
 HX-1 Open Deck Covering
 HJL-1 Leveling Deck Covering
 HT-02 Marine Covering Coat
HOME >>HH-3 A-60 Class Fireproof Deck

一.Structure Type:
二.Technical Index:


Item name


Executive standard


HH-3 Fireproof Deck Covering

Initial setting time


Q/HCF 1-2004


Final setting time



Modulus of rapture



Compressive strength






Water absorption



Oil absorption



Heat conductivity




In accordance with IMO.FTPC Part 1/IMO.A 799(19)



Fire Rating



Weight per square meter

≤60 kg/m2/45mm

Characteristic: Fire rating is A-60 class and has very strong moisture-proof
Applicable for: Covering for A-60 class decks and damp cabins
Consume amount: 60 kg/m2
Packing: Dry material (A component): 30kg/pack
Storage: Cool and dry place, moisture-proof, the quality guarantee period is 6 months
Approval Certificate: ABS、BV、CCS、DNV、EC、GL 、KR、LR、NK
四.Application Method:
4.1 Preparation prior to application
4.1.1 The U-shaped steel stiffeners which the interval is 300mm shall be welded onto the steel decks, the other welding and fairing by hot working on the steel decks that may interfere with the application of covering are to be finished beforehand.
4.1.2 The oils, water, anticorrosive paints, impurities on steel plates are to be removed meanwhile the surface preparation is carried out according to the requirements of Grade P2 of CB3230 or Grade St2 of ISO8501-1.
4.2 Application Procedures
4.2.1 Stir the dry materials (A component) evenly near the construction site or in agitator, according to the ratio of covering and water which is about 6:1 on weight, and pour the covering onto the steel deck plate, rub the covering back and forth with a trowel to moisture the steel decks sufficiently, then striking off the covering with wooden ruler, and consolidating and leveling the covering surface with trowel.
4.2.2 After the covering application finished, it should be kept maintain for 1 to 2 days with spray a suitable amount of water or maintaining agent on its surface, and people may walk on it. After the covering completely hardened, the floors can be adhered.
4.2.3 In the whole application and maintenance period, the environmental temperature should be a range of 0~35℃, cool-down measure is to be taken if the temperature is higher than 35℃ or heat preservation measure is to be taken if the temperature is lower than 0℃.
5.1 The dry material (A component) shall be kept in dry place, avoid rain showering or water dipping. If the cement is obviously caked, it shall not be used.

   Huzhou City Huicheng Marine Covering Co.,Ltd.  Tel:0572-2042222  Fax:0572-2045524
Address: No.1 Licun Road , Huzhou City, Zhejiang Province   E-mail:huicheng1122@126.com